Physical specifications: 12-slot Director
Height
Width
Depth
Weight
AC voltage
Hertz
Phases
Maximum amps
- 110V/21A
- 220V/10.5A
- 208V/11.5A
Maximum Operating VA
Physical Specifications: 6-slot Director
Height
19.25 in. (489 mm)
Width
23.6 in. (599.4 mm)
Depth
27.75 in. (705 mm)
Weight
200 lbs. (90.7 kg)
AC voltage
90-240 VAC
Hertz
47-63 Hz
Phases
1
Maximum amps
- 110V/10.5A
- 220V/5.25A
- 208V/5.75A
Maximum Operating
Physical specifications: 6/12-slot Director
Input power requirements
Operating temperature
Operational relative humidity
- 5% to 80% (non-condensing)
Air flow
- 450 CFM (214 liters/second)
ESCON specifications
IBM Enterprise Systems Connection Architecture.
- Cable type: Optical multi-mode
- Core diameter: 50 microns or 62.5 microns
- Cladding diameter: 125 microns
- Connector type: Multi-mode duplex ESCON connector
Bus and Tag specifications
- Compliant with OEMI FIPS-60 specification for Bus and Tag connectivity
- Block Multiplexor (Byte Multiplexor connectivity is not supported)
- Fibre Channel/FICON specifications
- Designed to meet FCIP, FC, FC-2 FC-BB-2, and FC-SB2 standards/emerging standards.
Multi-mode/Short wave
- Cable type: Optical multi-mode
- Core diameter: 62.5 microns and 50 microns
- Cladding diameter: 125 microns
- Numerical aperture: 0.275
- Attenuation (Max.): 1.5 dB/km @ 1310 nm; 3.75 dB/km @ 850 nm
- Operational wavelength: 850 nm
- Bandwidth (Min.): 160 MHz/km
- Fiber count: Duplex
- Length (Max.): 50 microns = 500 meters@ 100MB/s; 50 microns = 300 meters@ 200 MB/s; 62.5 microns = 250 meters @ 100 MB/s; 62.5 microns = 120 meters @ 200 MB/s
- Connector type: Duplex LC
- Line rate (Max.): 1.062 Gbit/sec
- Output power: -5 dBm
- Receiver sensitivity: -18 dBm
- Input power (Max.): 0 dBm
- Cable type: Optical single mode
- Core diameter: 9 microns
- Cladding diameter: 125 microns
- Wavelength: 1310 nm
- Maximum distance: 10 km
- Connector type: Duplex LC
- Line Rate (Max.): 1.062 Gbit/sec
- Output Power: -6 dBm
- Receiver sensitivity: -17 dBm
- Input power (Max.): -5 dBm
Ethernet 10/100 specifications
The Brocade USD-X supports IEEE 802.3, ANSI 8802-3 Ethernet 10/100 standards.
- Cable Type CAT5 UTP
- Line Rate 100 Mb/s
- Connector Type RJ-45
Gigabit Ethernet specifications
Supports full duplex Ethernet on each port and is designed to meet the following standards:
- IEEE 802.3z/802.3ab Gigabit Ethernet Standard
- IEEE 802.3x flow control
- IEEE 802.1p packet priority
Multi-mode/Short wave
- Cable type: Multi-mode Fibre
- Core diameter: 50/62.5 micron
- Cladding diameter: 125 micron
- Operational wavelength: 850 nm
- Line rate: 1.25 Gbit/sec
- Distance: 550 m – 50/125; 300 m – 62.5/125
- Output power: -5 dBm
- Receiver sensitivity: -20 dBm
- Input power (Max.): 0 dBm
- Connector Type: Duplex LC
Single-mode/Long wave
- Cable type: Single-mode fiber
- Core diameter: 9 micron
- Cladding diameter: 125 micron
- Operational wavelength: 1310 nm
- Line rate: 1.25 Gbit/sec
- Distance (Max.): 10 km
- Output power: -5 dBm
- Receiver sensitivity: -23 dBm
- Input power (Max.): 0 dBm
- Connector Type: Duplex LC
- Copper Cable: CAT 5 UTP
- Connector type: RJ-45
- Line rate: 1.25 Gbit/sec
- Distance (Max.): 100 m
OC-3 ATM specifications
Designed to meet the following standards:
- ATM Forum uni 3.0 and 3.1
- ATM Forum AAL -5
- ATM Forum UBR, VBR and CBR
- ATM Forum af-phy-0062.00
- ITU Recommendation I.432
- ITU Recommendation G.703, G.704, G.707
OC-3 physical specifications
- Cable type: Optical multi-mode
- Core diameter: 50 microns or 62.5 microns
- Cladding diameter: 125 microns
- Connector type: Duplex LC
- Distance (Max.): 2 km
- Line rate: 155 Mb/s
- Wavelength: 850 nm
- Output power: -16 dBm
- Receiver sensitivity: -33 dBm
- Input power (Max.): -12 dBm
- Cable type: Optical single-mode
- Core diameter: 9 microns
- Cladding diameter: 125 microns
- Connector type: Duplex LC
- Distance (Max.): 40 km
- Line rate: 155 Mb/s
- Wavelength: 1310 nm
- Output power: -3 dBm
- Receiver sensitivity: -36 dBm
- Input power (Max.): -7 dBm
Regulatory compliance
- FCC/EMC
- Conforms with FCC Part 15 Class A subpart J (U.S.A) EN55022 Class A, EN55024, 1998, EN61000-3-2/3
- Safety CUL 1950, EN6950 - IEC950
Management
- SNMP: managed by Brocade or enterprise manager client products
|